62 Publications Available
Your selection:
Hydrology Report Hydraulics Report
Hydraulic Analysis Report for Dodder CFRAMs
Type: Hydraulics Report
Published: 01/08/2008
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Hydraulics Report Eastern CFRAM UoM07
Type: Hydraulics Report
Published: 10/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Hydraulics Report Eastern CFRAM UoM09
Type: Hydraulics Report
Published: 20/12/2013
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Hydraulics Report Eastern CFRAM UoM10
Type: Hydraulics Report
Published: 08/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Hydraulics Report for Raphoe
Type: Hydraulics Report
Published: 04/10/2013
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Hydrolgy Analysis Report for Dodder CFRAMs
Type: Hydrology Report
Published: 13/02/2007
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Hydrology Report Eastern CFRAM UoM07
Type: Hydrology Report
Published: 07/12/2012
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Hydrology Report Eastern CFRAM UoM09
Type: Hydrology Report
Published: 10/04/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Hydrology Report Eastern CFRAM UoM10
Type: Hydrology Report
Published: 29/11/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Hydrology Report for Raphoe
Type: Hydrology Report
Published: 04/10/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Lee Catchment Flood Risk Assessment and Management Study Hydraulics Report
Type: Hydraulics Report
Published: 07/05/2009
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Lee Catchment Flood Risk Assessment and Management Study Hydrology Report
Type: Hydrology Report
Published: 01/11/2007
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
North Western - Neagh Bann CFRAM Study UoM 01 Hydraulics Report
Type: Hydraulics Report
Published: 16/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
North Western - Neagh Bann CFRAM Study UoM 01 Hydrology Report
Type: Hydrology Report
Published: 03/07/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
North Western - Neagh Bann CFRAM Study UoM 06 Hydraulics Report
Type: Hydraulics Report
Published: 23/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
North Western - Neagh Bann CFRAM Study UoM 06 Hydrology Report
Type: Hydrology Report
Published: 24/10/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
North Western - Neagh Bann CFRAM Study UoM 36 Hydraulics Report
Type: Hydraulics Report
Published: 12/06/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
North Western - Neagh Bann CFRAM Study UoM 36 Hydrology Report
Type: Hydrology Report
Published: 08/11/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Shannon CFRAM Study - Hydraulics Report for Unit of Management 23
Type: Hydraulics Report
Published: 26/01/2011
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Shannon CFRAM Study - Hydraulics Report for Unit of Management 24
Type: Hydraulics Report
Published: 26/01/2011
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Shannon CFRAM Study - Hydraulics Report for Unit of Management 25-26
Type: Hydraulics Report
Published: 26/01/2011
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Shannon CFRAM Study - Hydraulics Report for Unit of Management 27-28
Type: Hydraulics Report
Published: 26/01/2011
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Shannon CFRAM Study - Hydrology Report for Unit of Management 23
Type: Hydrology Report
Published: 26/01/2011
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Shannon CFRAM Study - Hydrology Report for Unit of Management 24
Type: Hydrology Report
Published: 26/01/2011
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Shannon CFRAM Study - Hydrology Report for Unit of Management 25-26
Type: Hydrology Report
Published: 26/01/2011
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Shannon CFRAM Study - Hydrology Report for Unit of Management 27-28
Type: Hydrology Report
Published: 26/01/2011
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Eastern CFRAM Study - Hydraulics Report for UoM14
Type: Hydraulics Report
Published: 02/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Eastern CFRAM Study - Hydraulics Report for UoM15
Type: Hydraulics Report
Published: 15/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Eastern CFRAM Study - Hydraulics Report for UoM17
Type: Hydraulics Report
Published: 22/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Eastern CFRAM Study - Hydraulics Report for UoMs 11-12-13
Type: Hydraulics Report
Published: 29/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Eastern CFRAM Study - Hydraulics Report for UoMs 11-12-13
Type: Hydraulics Report
Published: 29/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Eastern CFRAM Study - Hydraulics Report for UoMs 11-12-13
Type: Hydraulics Report
Published: 29/05/2014
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Eastern CFRAM Study - Hydrology Report for UoM14
Type: Hydrology Report
Published: 08/07/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Eastern CFRAM Study - Hydrology Report for UoM 15
Type: Hydrology Report
Published: 13/05/13
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Eastern CFRAM Study - Hydrology Report for UoMs 11-12-13
Type: Hydrology Report
Published: 02/09/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Eastern CFRAM Study - Hydrology Report for UoMs 11-12-13
Type: Hydrology Report
Published: 02/09/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Eastern CFRAM Study - Hydrology Report for UoMs 11-12-13
Type: Hydrology Report
Published: 02/09/2013
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Eastern CFRAM Study - Hydrology Report for UoMs 17
Type: Hydrology Report
Published: 30/09/13
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Western CFRAM Study UoM 18 Hydraulics Report
Type: Hydraulics Report
Published: 01/06/2016
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Western CFRAM Study UoM 18 Hydrology Report
Type: Hydrology Report
Published: 01/06/2016
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Western CFRAM Study UoM 19 Hydraulics Report
Type: Hydraulics Report
Published: 01/06/2016
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Western CFRAM Study UoM 19 Hydrology Report
Type: Hydrology Report
Published: 01/06/2016
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Western CFRAM Study UoM 20 Hydraulics Report
Type: Hydraulics Report
Published: 01/06/2016
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Western CFRAM Study UoM 20 Hydrology Report
Type: Hydrology Report
Published: 01/06/2016
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Western CFRAM Study UoM 21 Hydraulics Report
Type: Hydraulics Report
Published: 01/06/2016
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Western CFRAM Study UoM 21 Hydrology Report
Type: Hydrology Report
Published: 01/06/2016
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
South Western CFRAM Study UoM 22 Hydraulics Report
Type: Hydraulics Report
Published: 01/06/2016
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
South Western CFRAM Study UoM 22 Hydrology Report
Type: Hydrology Report
Published: 01/06/2016
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Suir CFRAM Study UoM16 Hydraulics Report
Type: Hydraulics Report
Published: 28/05/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Suir CFRAM Study UoM16 Hydrology Report
Type: Hydrology Report
Published: 16/07/2015
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Suir CFRAM Study UoM16 Rating Review Report
Type: Hydrology Report
Published: 14/08/2009
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Western CFRAM Unit of Management 29 - Galway Bay South East Final Hydraulic Modelling Report
Type: Hydraulics Report
Published: 04/09/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Western CFRAM Unit of management 29 – Galway Bay South East Hydrology Report Final Report
Type: Hydrology Report
Published: 01/02/2012
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Western CFRAM Unit of Management 30 and 31 - Corrib and Owengowla Final Hydraulic Modelling Report
Type: Hydraulics Report
Published: 04/09/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Western CFRAM Unit of Management 30 and 31 -Corrib and Owengowla Final Hydraulic Modelling Report
Type: Hydraulics Report
Published: 04/09/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Western CFRAM Unit of management 30 - Corrib Hydrology Report Final report
Type: Hydrology Report
Published: 01/02/2014
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Western CFRAM Unit of Management 32 - Erriff and Clew BayFinal Hydraulic Modelling Report
Type: Hydraulics Report
Published: 04/09/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Western CFRAM Unit of Management 32 – Erriff-Clew BayHydrology Report Final report
Type: Hydrology Report
Published: 01/02/2014
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Western CFRAM Unit of Management 34 - Moy and Killala BayFinal Hydraulic Modelling Report
Type: Hydraulics Report
Published: 04/09/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Western CFRAM Unit of management 34 - Moy and Killala BayHydrology Report Final Report
Type: Hydrology Report
Published: 01/09/2014
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )
Western CFRAM Unit of Management 35 -Sligo Bay and Drowes Final Hydraulic Modelling Report
Type: Hydraulics Report
Published: 04/09/2015
Published by: Office of Public Works
This report provides information relating to the data used for the hydraulic modelling that was carried out within the study area. The report includes full detail on hydraulic model information that was used as input material, model schematisation and construction, sensitivity analysis, calibration, verification, model limitations and handover notes. This information is provided as a single source of reference for each AFA studied as part of the CFRAM study and formed the basis for the CFRAM mapping.
Download ( .PDF )
Western CFRAM Unit of management 35 - Sligo Bay/Drowes Hydrology Report Final Report
Type: Hydrology Report
Published: 01/02/2014
Published by: Office of Public Works
Technical report detailing the review of historic floods; the analysis of river flow, water level and rainfall data; and the analysis of catchments and sub-catchments, in order to derive estimates, for a range of design event probabilities, of peak fluvial flood flows and hydrographs, coastal flood levels, and their joint probability of occurrence, throughout the Study area. The report describes the calibration, validation and sensitivity tests of the results, and considers the impacts of future environmental and catchment changes.
Download ( .PDF )